MAG3110 Magnetometer To Arduino Uno: Difference between revisions

From AgileMe
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 8: Line 8:
[[File:MAG3110 and Arduino Uno bb.png|500px|Connecting The MAG3110 To The Arduino Uno]]
[[File:MAG3110 and Arduino Uno bb.png|500px|Connecting The MAG3110 To The Arduino Uno]]


===Pin Connection Table===
{| class="wikitable"
{| class="wikitable"
!Unit
!MAG3110
!From
!Arduino Uno
!To
|-
|-
|Arduino Uno
|<code>VCC</code>
|<code>VCC</code>
|<code>3.3V</code>
|<code>3.3V</code>
|-
|-
|Arduino Uno
|<code>GND</code>
|<code>GND</code>
|<code>GND</code>
|<code>GND</code>
|-
|-
|Arduino Uno
|<code>SCL</code>
|<code>CE</code>
|<code>analogue pin A5</code>
|<code>digital pin 7</code>
|-
|-
|Arduino Uno
|<code>SDA</code>
|<code>CSN</code>
|<code>analogue pin A4</code>
|<code>digital pin 8</code>
|-
|-
|Arduino Uno
|<code>INT</code>
|<code>SCK</code>
|<code>Not Connected</code>
|<code>digital pin 13</code>
|-
|Arduino Uno
|<code>MOSI</code>
|<code>digital pin 11</code>
|-
|Arduino Uno
|<code>MISO</code>
|<code>digital pin 12</code>
|-
|Arduino Uno
|<code>IRQ</code>
|<code>not connected</code>
|}
|}


Latest revision as of 05:14, 7 March 2020


This page refers to using an Arduino Uno and a MAG3110 magnetometer to receive analogue data relating to the direction and attitude of the magnetometer.

Connection

Connecting the working Arduino Uno with the MAG3110 device:

Connecting The MAG3110 To The Arduino Uno

Pin Connection Table

MAG3110 Arduino Uno
VCC 3.3V
GND GND
SCL analogue pin A5
SDA analogue pin A4
INT Not Connected

References

See Also

Retrieved from "https://agileme.wiki/wiki/index.php?title=MAG3110_Magnetometer_To_Arduino_Uno&oldid=1251"