MAG3110 Magnetometer To Arduino Uno: Difference between revisions

From AgileMe
Jump to navigation Jump to search
No edit summary
Line 8: Line 8:
[[File:MAG3110 and Arduino Uno bb.png|500px|Connecting The MAG3110 To The Arduino Uno]]
[[File:MAG3110 and Arduino Uno bb.png|500px|Connecting The MAG3110 To The Arduino Uno]]


{| class="wikitable"
!Unit
!From
!To
|-
|Arduino Uno
|<code>VCC</code>
|<code>3.3V</code>
|-
|Arduino Uno
|<code>GND</code>
|<code>GND</code>
|-
|Arduino Uno
|<code>CE</code>
|<code>digital pin 7</code>
|-
|Arduino Uno
|<code>CSN</code>
|<code>digital pin 8</code>
|-
|Arduino Uno
|<code>SCK</code>
|<code>digital pin 13</code>
|-
|Arduino Uno
|<code>MOSI</code>
|<code>digital pin 11</code>
|-
|Arduino Uno
|<code>MISO</code>
|<code>digital pin 12</code>
|-
|Arduino Uno
|<code>IRQ</code>
|<code>not connected</code>
|}


==References==
==References==

Revision as of 02:21, 7 March 2020


This page refers to using an Arduino Uno and a MAG3110 magnetometer to receive analogue data relating to the direction and attitude of the magnetometer.

Connection

Connecting the working Arduino Uno with the MAG3110 device:

Connecting The MAG3110 To The Arduino Uno

Unit From To
Arduino Uno VCC 3.3V
Arduino Uno GND GND
Arduino Uno CE digital pin 7
Arduino Uno CSN digital pin 8
Arduino Uno SCK digital pin 13
Arduino Uno MOSI digital pin 11
Arduino Uno MISO digital pin 12
Arduino Uno IRQ not connected

References

See Also

Retrieved from "https://agileme.wiki/wiki/index.php?title=MAG3110_Magnetometer_To_Arduino_Uno&oldid=1242"