View source for L298N Motor Controller To Arduiono Uno

[[Category:Arduino]][[Category:Agile:Projects]]

This page refers to using an [https://arduino.cc Arduino] Uno and a L298N DC motor control bridge to control two motors.

==Connection==
Connecting the Arduino Uno with the L298N motor control bridge:

[[File:L298N DC Motor Control bb.png|500px|Connecting L298N DC Motor Control Bridge To The Arduino Uno]]

===Pin Connection Table===
{| class="wikitable"
!L298N
!Arduino Uno
|-
|<code>VCC</code>
|<code>12V</code>
|-
|<code>GND</code>
|<code>GND</code>
|-
|<code>ENA (motor A speed)</code>
|<code>Digital pin D6</code>
|-
|<code>IN1 (motor A direction)</code>
|<code>Digital pin D5</code>
|-
|<code>IN2 (motor A direction)</code>
|<code>Digital pin D4</code>
|-
|<code>ENB (motor B speed)</code>
|<code>Digital pin D10</code>
|-
|<code>IN3 (motor B direction)</code>
|<code>Digital pin D3</code>
|-
|<code>IN4 (motor B direction)</code>
|<code>Digital pin D2</code>
|}


==References==
# [https://howtomechatronics.com/tutorials/arduino/arduino-dc-motor-control-tutorial-l298n-pwm-h-bridge/ Arduino DC Motor Control Tutorial – L298N | PWM | H-Bridge], access 7 Mar 2020

==See Also==
*